Board Foot Calculator Desktop Header Logo
Board Foot Calculator

Cord of Wood Calculator

Measure your firewood stack and find out how many full cords and face cords it holds, and what it should cost.

Stack measurements

Measure a tightly stacked pile. Piece length is how deep the stack is (front to back).

How the cord calculation works

Firewood is sold by stacked volume. Multiply the stack's length, height and depth in feet to get cubic feet, then divide by 128, the volume of one full cord (4 ft × 4 ft × 8 ft):

Cords = (Length ft × Height ft × Depth ft) ÷ 128

For example, a stack 12 ft long, 4 ft high, with 16-inch pieces is 12 × 4 × 1.333 = 64 cubic feet, or 0.5 cord.

Full cord vs face cord

Unit Dimensions Stacked volume Fraction of a full cord
Full cord4' × 4' × 8'128 ft³ (3.62 m³)1
Face cord, 12" pieces4' × 8' × 12"32 ft³1/4
Face cord, 16" pieces4' × 8' × 16"42.7 ft³1/3
Face cord, 24" pieces4' × 8' × 24"64 ft³1/2
Half cord4' × 4' × 4'64 ft³1/2

Buying tips

Working with logs rather than split firewood? Use the log calculator for board feet by Doyle, Scribner or International rules, or the wood weight calculator to check whether a load is safe for your truck.

Frequently Asked Questions

What are the dimensions of a cord of wood?
A full (standard) cord is a tightly stacked pile 4 feet high, 4 feet deep and 8 feet long, which is 128 cubic feet including the air gaps between pieces.
What is a face cord?
A face cord (also called a rick or rank) is a stack 4 feet high and 8 feet long, but only one piece deep. With the common 16-inch piece length, a face cord is one third of a full cord. Local definitions vary, so always ask the seller for the piece length.
How much solid wood is in a cord?
Because of the air space between split pieces, a 128 cubic foot cord holds roughly 70 to 90 cubic feet of solid wood. Straight, tightly stacked wood is at the high end; crooked or loosely stacked wood is at the low end.
How many board feet are in a cord of wood?
A common forestry rule of thumb is about 500 board feet of sawlog volume per cord (2 cords per thousand board feet). It is only an approximation: the real figure depends on log size and the log rule used.
How do I check that I received a full cord?
Stack the delivered wood tightly, measure length, height and piece length in feet, and multiply them. Divide the result by 128 to get full cords. This calculator does that for you and shows the fair price at your agreed rate per cord.