Board Foot Calculator Desktop Header Logo
Калкулатор BD FT
Philippine Standards

Калкулатор за Дървен Материал Филипини

Изчислете board feet на дървен материал по филипинските стандарти с размери в инчове, футове или метри и цена за board foot.

Philippine Board Feet Calculator

Enter dimensions in centimeters or inches

Philippines Standard: Board feet is commonly used for lumber pricing. Formula: (T cm × W cm × L m × 423.78) ÷ 10,000 = BF

Philippine Lumber

Common species: Mahogany, Narra, Yakal, Tanguile, Apitong. Sizes typically sold in metric dimensions but priced per board foot.

Metric to Imperial

1 inch = 2.54 cm. 1 foot = 30.48 cm. 1 meter = 3.281 feet. Use our converter for quick calculations.

Buying Tips

Always verify actual dimensions vs. nominal. Check moisture content for kiln-dried lumber. Compare prices per BF across suppliers.

Често задавани въпроси

How do I convert metric dimensions to board feet?
BF = (thickness cm × width cm × length meters × 423.78) ÷ 10,000. Or convert to inches: 1 cm = 0.3937 inches, then use standard BF formula.
What is the standard lumber pricing in Philippines?
Prices vary by species and quality. Common lumber: ₱20-40/BF. Premium hardwoods: ₱50-100+/BF. Always get quotes from multiple suppliers.
What are common lumber sizes in the Philippines?
Common metric sizes: 2.5×5cm, 5×10cm, 5×15cm, 5×20cm. Lengths typically 2.4m, 3m, or 4m. Converted roughly equals 1×2, 2×4, 2×6, 2×8.

How to work out board feet for Philippine lumber, in plain words

Formula: board feet = (thickness in inches x width in inches x length in feet) / 12. In the Philippines, lumber is often sold in metric sizes but priced per board foot, so convert first: 1 inch = 2.54 cm, 1 foot = 30.48 cm, and 1 meter = 3.281 feet. The calculator also uses the metric shortcut in its FAQ: board feet = (thickness in cm x width in cm x length in meters x 423.78) / 10,000, which gives the same result.

Worked example: take a board 5 cm thick, 15 cm wide, and 3 meters long, in a quantity of 10 pieces. Converted sizes are 1.97 inches thick, 5.91 inches wide, and 9.84 feet long. Per piece: (1.97 x 5.91 x 9.84) / 12 = 9.54 board feet. For 10 pieces: 9.54 x 10 = 95.35 board feet. Using the metric shortcut: (5 x 15 x 3 x 423.78) / 10,000 = 9.54 board feet per piece, which matches, so both routes agree when the conversions are done correctly.

Common mistakes: using nominal metric sizes without checking actual dressed sizes, rounding conversions too early, and mixing centimeters and meters in the same calculation. Convert all three dimensions to the same unit system first, then apply the formula, and keep at least two decimal places until the final total.

Waste factor: allow 10 percent extra for metric cutting, end trimming, and size variation between suppliers. For a 95.35 board foot order, 10 percent extra is 9.54 board feet, giving a buying total of about 104.89 board feet. Allow more waste for rough sawn hardwood that still needs dressing.

When to use this method: use this calculator for Philippine lumber bought in metric sizes and priced per board foot. Use the metric wood calculator for straight metric to imperial conversion, the lumber calculator for lumber already in inches and feet, and the weight calculator when you need transport weight for the same order.

Related Philippine lumber calculators

These three tools cover the next step after Philippine board feet: metric conversion, lumber in inches and feet, and load weight.