Board Foot Calculator Desktop Header Logo
BD FT-kalkylator
Weight Estimation

Kalkylator för Trävikt och Densitet

Beräkna träets vikt utifrån board feet och träslagets densitet, för rått eller torkat virke, i kilogram och pund.

Short answer: weight = total board feet x pounds per board foot for that species at that moisture content. Red oak at 12 percent moisture is about 3.75 pounds per board foot, so 100 board feet weighs about 375 pounds.

Weight Calculator

Calculate weight from board feet and wood species

Note: Weights are approximate. Actual weight varies by specific gravity, moisture content, and wood condition. Green lumber (>19% MC) weighs significantly more.

Moisture Content

  • Green: 50-100% (freshly cut)
  • Air-dried: 15-20%
  • Kiln-dried: 6-12%

Wood Density Ranges

  • Softwoods: 20-35 lbs/cu ft
  • Hardwoods: 35-55 lbs/cu ft
  • Exotic: 40-70 lbs/cu ft

Weight Factors

  • Species density
  • Moisture content
  • Specific gravity
  • Wood condition

Vanliga frågor

How much does a board foot of oak weigh?
Red oak at 12% moisture content weighs approximately 3.75 lbs per board foot. White oak is slightly heavier at about 3.9 lbs/BF.
Does moisture content affect weight significantly?
Yes! Green lumber can weigh 2-3 times more than kiln-dried. Water adds significant weight. A board at 50% MC weighs much more than the same board at 12% MC.
How do I calculate shipping weight?
Calculate total weight, add 10-15% for packaging/pallets. Standard pallet holds ~2,000 lbs. Full truck load is typically 40,000-45,000 lbs.
How much does a board foot of pine weigh?
White pine at 12 percent moisture content weighs about 2.33 pounds per board foot, from a density of 28 pounds per cubic foot divided by 12. So 50 board feet of white pine weighs about 116.67 pounds before packaging.
How many board feet fit on a 2,000 pound pallet?
It depends on the species. Red oak at 12 percent moisture weighs about 3.75 pounds per board foot, so a 2,000 pound pallet holds about 533 board feet. Lighter white pine at 2.33 pounds per board foot fits about 857 board feet on the same pallet.
How do I convert pounds per board foot to pounds per cubic foot?
Multiply by 12, because one cubic foot equals 12 board feet. Red oak at 3.75 pounds per board foot is 45 pounds per cubic foot, and white pine at 2.33 pounds per board foot is 28 pounds per cubic foot.

How to work out wood weight from board feet, in plain words

Formula: weight = total board feet x weight per board foot for that species at that moisture content. Board feet alone do not give weight, because a board foot of light softwood weighs far less than a board foot of dense hardwood, and green lumber weighs far more than kiln dried lumber of the same species.

Worked example: take red oak at 12 percent moisture content, which weighs about 3.75 pounds per board foot, as stated in the FAQ on this page. For 100 board feet: 100 x 3.75 = 375 pounds. For a smaller order, 20 boards of 2x4x8 lumber at actual size 1.5 by 3.5 by 8 feet give 70 board feet, and at the same red oak rate that is 70 x 3.75 = 262.5 pounds before packaging.

Second worked example: white pine at 12 percent moisture content weighs about 2.33 pounds per board foot. For 50 board feet: 50 x 2.33 = 116.67 pounds. Add 10 percent for packaging and pallets and the shipping weight is about 128.33 pounds. A full 2,000 pound pallet of red oak at 3.75 pounds per board foot holds about 533 board feet, while the same pallet of white pine holds about 857 board feet.

Common mistakes: using a kiln dried density for green lumber, using one species density for a mixed load, and forgetting that moisture content is the largest single variable. Green lumber can weigh 2 to 3 times more than kiln dried lumber, so always record moisture content with the species when you quote a weight.

Waste and shipping factor: the FAQ on this page says to add 10 to 15 percent for packaging and pallets. For the 262.5 pound example above, that gives a shipping weight of about 288.75 pounds at 10 percent, and about 301.88 pounds at 15 percent. Use the shipping weight, not the bare lumber weight, when you check pallet capacity and truck limits.

When to use this method: use this calculator when you need transport, handling, or structural load weight from a board foot order. Use the lumber calculator first to get board feet, the logs calculator for round log weight basis, and the plywood calculator for sheet goods before converting sheets to board feet.

Related weight calculators

These tools cover the next step after load weight: board feet for lumber and wood, log scaling, sheet goods, and whole tree yield.