Калькулятор пиломатериалов (Board Foot)
Рассчитайте board feet для досок и бруса стандартных размеров: толщина, ширина, длина и количество — мгновенный результат и стоимость.
Short answer: board feet = (thickness in inches x width in inches x length in feet) / 12, using actual dressed sizes. A 2x4x8 at actual size 1.5 by 3.5 inches is 3.5 board feet.
Lumber Calculator
Select a common lumber size or enter custom dimensions
Actual dimension (not nominal)
Remember: Nominal sizes (like 2×6) are larger than actual dimensions. A 2×6 actually measures 1.5" × 5.5" after drying and planing.
1× Boards
Actual 3/4" thick. Used for trim, shelving, and light projects.
2× Lumber
Actual 1.5" thick. Standard framing lumber for walls, floors, and decks.
4× Posts
Actual 3.5" thick. Used for posts, beams, and heavy structural work.
6× Timbers
Actual 5.5" thick. Heavy timbers for posts, beams, and landscaping.
Часто задаваемые вопросы
What's the difference between nominal and actual size?
Should I use nominal or actual dimensions?
How many board feet in a typical 2×4×8?
How many board feet in a 2×6×8?
How do I calculate board feet for a whole lumber order?
What is the board foot formula for hardwood sold by quarters?
How to work out board feet for lumber, in plain words
Formula: board feet = (thickness in inches x width in inches x length in feet) / 12. Basis for this page: actual dressed dimensions, not nominal sizes. A board sold as 2x4 actually measures 1.5 inches by 3.5 inches after drying and planing, and that dressed size is what you should enter for an accurate order.
Worked example: take 20 pieces of 2x4 lumber, actual size 1.5 inches by 3.5 inches, each 8 feet long. Per piece: (1.5 x 3.5 x 8) / 12 = 3.5 board feet. For 20 pieces: 3.5 x 20 = 70 board feet. If you used nominal sizes instead, you would get (2 x 4 x 8) / 12 = 5.33 board feet per piece, or 106.67 board feet for 20 pieces, which overstates the true wood volume by more than half. That difference is why this page uses actual sizes, and why lumber yards bill softwood by nominal size, so check which basis your supplier uses before you pay.
Second worked example: take 10 pieces of 2x6x10 lumber, actual size 1.5 inches by 5.5 inches. Per piece: (1.5 x 5.5 x 10) / 12 = 6.875 board feet. For 10 pieces: 6.875 x 10 = 68.75 board feet. And 12 pieces of 1x6x8, actual size 0.75 inches by 5.5 inches: per piece (0.75 x 5.5 x 8) / 12 = 2.75 board feet, so 12 pieces give 33 board feet. Together the two sizes total 101.75 board feet before waste.
Common mistakes: entering nominal sizes when you need actual volume, mixing inches and feet in the length field, and forgetting to multiply by quantity. Measure a sample board with a tape measure if you are not sure whether your stock is dressed or rough sawn.
Waste factor: allow 10 percent extra for cuts, end trimming, and defects. For a 70 board foot order, 10 percent extra is 7 board feet, giving a buying total of 77 board feet, which is 22 boards at 3.5 board feet each. Allow more waste for short pieces, mitre cuts, or boards with knots and splits.
When to use this method: use this calculator for dressed softwood and hardwood boards bought by the piece. Use the logs calculator for round logs, the plywood calculator for sheets, and the weight calculator after you have board feet and need load weight.
Related lumber guides and calculators
These links cover the next step after lumber board feet: the dressed size table, the nominal vs actual guide, load weight, and full project estimates for trees and sheds.