Board Foot Calculator Desktop Header Logo
BD FT-kalkylator
Standard Lumber Calculator

Kalkylator för Sågat Virke (Board Foot)

Beräkna board feet för brädor och reglar i standardmått: tjocklek, bredd, längd och antal – resultat och kostnad direkt.

Short answer: board feet = (thickness in inches x width in inches x length in feet) / 12, using actual dressed sizes. A 2x4x8 at actual size 1.5 by 3.5 inches is 3.5 board feet.

Lumber Calculator

Select a common lumber size or enter custom dimensions

Actual dimension (not nominal)

Remember: Nominal sizes (like 2×6) are larger than actual dimensions. A 2×6 actually measures 1.5" × 5.5" after drying and planing.

1× Boards

Actual 3/4" thick. Used for trim, shelving, and light projects.

2× Lumber

Actual 1.5" thick. Standard framing lumber for walls, floors, and decks.

4× Posts

Actual 3.5" thick. Used for posts, beams, and heavy structural work.

6× Timbers

Actual 5.5" thick. Heavy timbers for posts, beams, and landscaping.

Vanliga frågor

What's the difference between nominal and actual size?
Nominal is the rough-cut size before drying and planing. Actual is the finished dimension. A 2×4 nominally is 2"×4" but measures 1.5"×3.5" actual.
Should I use nominal or actual dimensions?
Use actual dimensions for accurate board foot calculations. Our presets automatically use actual sizes for common lumber.
How many board feet in a typical 2×4×8?
Using actual dimensions: (1.5 × 3.5 × 8) ÷ 12 = 3.5 board feet per 8-foot 2×4.
How many board feet in a 2×6×8?
Using actual dimensions: (1.5 × 5.5 × 8) ÷ 12 = 5.5 board feet per 8-foot 2×6. Using nominal sizes, the same board is 8 board feet, so confirm which basis your supplier bills on before you order.
How do I calculate board feet for a whole lumber order?
Work out board feet per piece, multiply by the piece count for each size, add the sizes together, then add 10 percent for waste. For example, 10 pieces of 2x6x10 at actual size give 68.75 board feet, and 12 pieces of 1x6x8 give 33 board feet, for a combined 101.75 board feet before waste.
What is the board foot formula for hardwood sold by quarters?
Hardwood thickness is sold in quarters, where 4/4 is 1 inch, 5/4 is 1.25 inches, and 8/4 is 2 inches. Use the quarter thickness and the actual measured width in the same formula: (thickness x width x length in feet) / 12.

How to work out board feet for lumber, in plain words

Formula: board feet = (thickness in inches x width in inches x length in feet) / 12. Basis for this page: actual dressed dimensions, not nominal sizes. A board sold as 2x4 actually measures 1.5 inches by 3.5 inches after drying and planing, and that dressed size is what you should enter for an accurate order.

Worked example: take 20 pieces of 2x4 lumber, actual size 1.5 inches by 3.5 inches, each 8 feet long. Per piece: (1.5 x 3.5 x 8) / 12 = 3.5 board feet. For 20 pieces: 3.5 x 20 = 70 board feet. If you used nominal sizes instead, you would get (2 x 4 x 8) / 12 = 5.33 board feet per piece, or 106.67 board feet for 20 pieces, which overstates the true wood volume by more than half. That difference is why this page uses actual sizes, and why lumber yards bill softwood by nominal size, so check which basis your supplier uses before you pay.

Second worked example: take 10 pieces of 2x6x10 lumber, actual size 1.5 inches by 5.5 inches. Per piece: (1.5 x 5.5 x 10) / 12 = 6.875 board feet. For 10 pieces: 6.875 x 10 = 68.75 board feet. And 12 pieces of 1x6x8, actual size 0.75 inches by 5.5 inches: per piece (0.75 x 5.5 x 8) / 12 = 2.75 board feet, so 12 pieces give 33 board feet. Together the two sizes total 101.75 board feet before waste.

Common mistakes: entering nominal sizes when you need actual volume, mixing inches and feet in the length field, and forgetting to multiply by quantity. Measure a sample board with a tape measure if you are not sure whether your stock is dressed or rough sawn.

Waste factor: allow 10 percent extra for cuts, end trimming, and defects. For a 70 board foot order, 10 percent extra is 7 board feet, giving a buying total of 77 board feet, which is 22 boards at 3.5 board feet each. Allow more waste for short pieces, mitre cuts, or boards with knots and splits.

When to use this method: use this calculator for dressed softwood and hardwood boards bought by the piece. Use the logs calculator for round logs, the plywood calculator for sheets, and the weight calculator after you have board feet and need load weight.

Related lumber guides and calculators

These links cover the next step after lumber board feet: the dressed size table, the nominal vs actual guide, load weight, and full project estimates for trees and sheds.