Board Foot Calculator Desktop Header Logo
Board Foot Calculator
Forestry Calculator

Tree Board Foot Calculator

Estimate board feet and timber yield from standing trees based on DBH (diameter at breast height), merchantable log height, and species waste factors.

Short answer: with the Doyle rule, board feet = ((DBH minus 4) squared / 16) x merchantable height in feet. An 18 inch tree with 32 feet of usable height gives 392 board feet before waste.

Tree Measurement

Enter tree dimensions to estimate board foot yield

Tip: DBH is measured at 4.5 feet above ground. Merchantable height is the usable length from stump to first major defect or branch.

Doyle Rule

Most conservative estimate. Formula: ((D-4)²/16) × L. Best for smaller diameter logs (12-28"). Commonly used in eastern US.

Scribner Rule

Moderate estimate based on diagram method. Most widely used in US. Provides middle-ground between Doyle and International rules.

International Rule

Most accurate for large logs. Formula based on cylinder volume with taper. Preferred for hardwoods and large diameter timber.

Frequently Asked Questions

What is DBH and how do I measure it?
DBH (Diameter at Breast Height) is measured at 4.5 feet above ground level. Use a diameter tape or measure circumference and divide by π (3.14159).
Which log rule should I use?
Doyle for smaller logs (12-28" diameter), Scribner for general use (most common in US), International for large logs and hardwoods. Check local standards.
What is a typical waste factor?
15-25% is typical. Factors include: bark loss, sawdust (kerf), defects, taper, and trimming. Higher quality trees have lower waste.
How many board feet are in an 18 inch tree?
Using the Doyle rule, an 18 inch DBH tree with 32 feet of merchantable height gives 392 board feet before waste, or 333.2 board feet after a 15 percent waste factor. Scribner gives 431.92 board feet and International gives 520.99 board feet for the same tree, before waste.
Why do Doyle, Scribner, and International give different numbers?
Each rule was built for different log sizes and regions. Doyle is the most conservative and underestimates small logs. Scribner sits in the middle and is the most widely used in the US. International is the most accurate for large logs and hardwoods. Always agree the rule with your buyer before you sell.
How do I estimate the value of a standing tree?
Multiply the net board feet by your local price per board foot. For example, 333.2 net board feet at $1.50 per board foot is worth about $499.80. Check local timber prices, because species and log quality change the price per board foot a lot.

How to work out board feet for a tree, in plain words

Formula: with the Doyle rule, board feet = ((DBH minus 4) squared / 16) x merchantable height in feet, where DBH is the trunk diameter in inches at 4.5 feet above the ground. Doyle is the most conservative rule, so it gives the lowest number. Scribner and International use different formulas on the same two measurements and give higher numbers for the same tree.

Worked example: take one tree with an 18 inch DBH and 32 feet of merchantable height. Doyle: ((18 minus 4) squared / 16) x 32 = (196 / 16) x 32 = 392 board feet. Scribner: (0.79 x 324 minus 36 minus 4) x 2 = 431.92 board feet. International: (0.905 x 324 minus 32.72) x 2 = 520.99 board feet. After a 15 percent waste factor, the three rules give 333.2, 367.13, and 442.84 board feet. At $1.50 per board foot, the Doyle net yield is worth about $499.80.

Common mistakes: measuring DBH at the wrong height, counting height up to the top of the tree instead of the merchantable height, and forgetting the waste factor. Measure DBH at exactly 4.5 feet above the ground, and stop the height where the trunk branches or the diameter drops below saw log size.

When to use this method: use this calculator for a single standing tree or a small stand, and agree the log rule with your buyer first, because the rule changes the number by up to a third. For the full method with a second worked example, read our guide on how to calculate board feet in a standing tree, and use the logs calculator once the tree is cut into logs.

Specialized Calculators

Choose from our collection of specialized board foot calculators tailored for specific materials and applications

Insulation Board Feet Coverage Calculator Icon

Insulation Board Foot Calculator

Calculate insulation board feet and coverage area for fiberglass batts, rigid foam board, and cellulose. Includes total R-value calculations.

Standing Timber Tree Board Feet Calculator Icon

Tree Board Foot Calculator

Estimate board feet and timber yield from standing trees based on DBH (diameter at breast height), merchantable log height, and species waste factors.

Forest Inventory Tree Volume Calculator Icon

Standing Trees Board Foot Calculator

Calculate total board feet for standing tree stands, timber cruising, basal area, and forest inventory volume by diameter class.

Wood Volume and Metric Board Foot Converter Icon

General Wood Volume Calculator

Calculate board feet, cubic volume, and estimated weight for hardwoods, softwoods, and exotic species. Instant wood volume calculations.

Plywood Sheet Goods Board Feet Converter Icon

Plywood Board Foot Calculator

Convert 4x8, 4x4, 5x5 plywood sheets to board feet and cubic feet volume. Calculate cost per board foot for CDX, OSB, and cabinet grade plywood.

Log Scaling Board Foot Scale Calculator Icon

Log Scaling Board Foot Calculator

Calculate log volume and board feet using Doyle Log Rule, Scribner Dec C, and International 1/4 inch Log Rules for sawmill timber scaling.

Dimensional Lumber Volume Board Feet Calculator Icon

Lumber Board Foot Calculator

Calculate board feet for standard dimensional lumber (2x4, 2x6, 4x4, 6x6). Free online tool using actual dressed sizes and instant pricing estimates.

Spray Foam Insulation Board Feet Coverage Calculator Icon

Spray Foam Board Foot Calculator

Calculate spray foam board feet, square footage, R-value, and DIY kit requirements for open cell and closed cell spray foam insulation.

Wood Species Weight and Density Board Foot Calculator Icon

Wood Weight Calculator

Calculate wood weight from board feet and species density. Convert oak, pine, maple, walnut, green vs kiln-dried lumber weights for shipping & load estimates.

Wall Framing Stud Count Board Feet Calculator Icon

Wall Stud Framing Board Foot Calculator

Calculate studs, top/bottom plates, headers, and total board feet for wall framing. Estimate framing lumber costs for 16 inch and 24 inch OC studs.

Philippine Lumber Board Feet Rate Calculator Icon

Board Feet Calculator Philippines

Calculate board feet (BDFT) for Philippine lumber standards (cm, meters, inches). Supports Narra, Mahogany, Yakal rates with ₱ cost estimates.

Deck Board Calculator and Lumber Estimator Icon

Deck Board Calculator

Calculate deck boards, linear feet, and costs

Cubic Feet to Cubic Yards and Board Feet Calculator Icon

Cubic Feet Calculator

Calculate cubic feet, cubic yards, and board feet

Board Foot Chart for Lumber Icon

Board Foot Chart

Board feet for 2x4, 2x6, 1x6 and more, by length

Firewood Cord Calculator Icon

Cord of Wood Calculator

Measure firewood stacks in full cords and face cords

🔗 Explore More Timber & Forestry Tools

Estimate log volume, standing trees, lumber yield, or wood weight with our specialized tools: