Board Foot Calculator Desktop Header Logo
बोर्ड फ़ुट (BD FT) कैलकुलेटर
Forestry Calculator

पेड़ बोर्ड फुट कैलकुलेटर

डीबीएच (व्यास) और प्रयोग करने योग्य लॉग ऊंचाई के आधार पर खड़े पेड़ से बोर्ड फीट और लकड़ी की उपज का अनुमान लगाएं।

Short answer: with the Doyle rule, board feet = ((DBH minus 4) squared / 16) x merchantable height in feet. An 18 inch tree with 32 feet of usable height gives 392 board feet before waste.

Tree Measurement

Enter tree dimensions to estimate board foot yield

Tip: DBH is measured at 4.5 feet above ground. Merchantable height is the usable length from stump to first major defect or branch.

Doyle Rule

Most conservative estimate. Formula: ((D-4)²/16) × L. Best for smaller diameter logs (12-28"). Commonly used in eastern US.

Scribner Rule

Moderate estimate based on diagram method. Most widely used in US. Provides middle-ground between Doyle and International rules.

International Rule

Most accurate for large logs. Formula based on cylinder volume with taper. Preferred for hardwoods and large diameter timber.

अक्सर पूछे जाने वाले प्रश्न

What is DBH and how do I measure it?
DBH (Diameter at Breast Height) is measured at 4.5 feet above ground level. Use a diameter tape or measure circumference and divide by π (3.14159).
Which log rule should I use?
Doyle for smaller logs (12-28" diameter), Scribner for general use (most common in US), International for large logs and hardwoods. Check local standards.
What is a typical waste factor?
15-25% is typical. Factors include: bark loss, sawdust (kerf), defects, taper, and trimming. Higher quality trees have lower waste.
How many board feet are in an 18 inch tree?
Using the Doyle rule, an 18 inch DBH tree with 32 feet of merchantable height gives 392 board feet before waste, or 333.2 board feet after a 15 percent waste factor. Scribner gives 431.92 board feet and International gives 520.99 board feet for the same tree, before waste.
Why do Doyle, Scribner, and International give different numbers?
Each rule was built for different log sizes and regions. Doyle is the most conservative and underestimates small logs. Scribner sits in the middle and is the most widely used in the US. International is the most accurate for large logs and hardwoods. Always agree the rule with your buyer before you sell.
How do I estimate the value of a standing tree?
Multiply the net board feet by your local price per board foot. For example, 333.2 net board feet at $1.50 per board foot is worth about $499.80. Check local timber prices, because species and log quality change the price per board foot a lot.

How to work out board feet for a tree, in plain words

Formula: with the Doyle rule, board feet = ((DBH minus 4) squared / 16) x merchantable height in feet, where DBH is the trunk diameter in inches at 4.5 feet above the ground. Doyle is the most conservative rule, so it gives the lowest number. Scribner and International use different formulas on the same two measurements and give higher numbers for the same tree.

Worked example: take one tree with an 18 inch DBH and 32 feet of merchantable height. Doyle: ((18 minus 4) squared / 16) x 32 = (196 / 16) x 32 = 392 board feet. Scribner: (0.79 x 324 minus 36 minus 4) x 2 = 431.92 board feet. International: (0.905 x 324 minus 32.72) x 2 = 520.99 board feet. After a 15 percent waste factor, the three rules give 333.2, 367.13, and 442.84 board feet. At $1.50 per board foot, the Doyle net yield is worth about $499.80.

Common mistakes: measuring DBH at the wrong height, counting height up to the top of the tree instead of the merchantable height, and forgetting the waste factor. Measure DBH at exactly 4.5 feet above the ground, and stop the height where the trunk branches or the diameter drops below saw log size.

When to use this method: use this calculator for a single standing tree or a small stand, and agree the log rule with your buyer first, because the rule changes the number by up to a third. For the full method with a second worked example, read our guide on how to calculate board feet in a standing tree, and use the logs calculator once the tree is cut into logs.

विशेषज्ञ कैलकुलेटर

विशिष्ट सामग्रियों और अनुप्रयोगों के लिए तैयार किए गए हमारे विशेषज्ञ बोर्ड फुट कैलकुलेटर चुनें

Insulation Board Feet Coverage Calculator Icon

इन्सुलेशन बोर्ड फुट कैलकुलेटर

फाइबरग्लास बैट्स, रिगिड फोम बोर्ड और सेलूलोज़ के लिए इन्सुलेशन बोर्ड फीट और कवरेज क्षेत्र की गणना करें।

Standing Timber Tree Board Feet Calculator Icon

पेड़ बोर्ड फुट कैलकुलेटर

डीबीएच (व्यास) और प्रयोग करने योग्य लॉग ऊंचाई के आधार पर खड़े पेड़ से बोर्ड फीट और लकड़ी की उपज का अनुमान लगाएं।

Forest Inventory Tree Volume Calculator Icon

खड़े पेड़ों के लिए बोर्ड फुट कैलकुलेटर

खड़े पेड़ों, टिम्बर क्रूज़िंग और व्यास वर्ग द्वारा वन इन्वेंट्री के लिए कुल बोर्ड फीट की गणना करें।

Wood Volume and Metric Board Foot Converter Icon

सामान्य लकड़ी आयतन कैलकुलेटर

हार्डवुड, सॉफ्टवुड और विदेशी प्रजातियों के लिए बोर्ड फीट, घन आयतन और अनुमानित वजन की त्वरित गणना करें।

Plywood Sheet Goods Board Feet Converter Icon

प्लाईवुड बोर्ड फुट कैलकुलेटर

4x8, 4x4, 5x5 प्लाईवुड शीट्स को बोर्ड फीट और घन फीट आयतन में बदलें। CDX और OSB के लिए लागत अनुमान लगाएं।

Log Scaling Board Foot Scale Calculator Icon

लॉग स्केलिंग बोर्ड फुट कैलकुलेटर

आरा मिलों के लिए डॉयल, स्क्रिबनर डेक सी और इंटरनेशनल 1/4 इंच नियमों का उपयोग करके गोल लकड़ी (लॉग) का आयतन निकालें।

Dimensional Lumber Volume Board Feet Calculator Icon

लंबर बोर्ड फुट कैलकुलेटर

मानक आयामी लकड़ी (2x4, 2x6, 4x4, 6x6) के लिए बोर्ड फीट की गणना करें। वास्तविक आकारों के साथ मुफ़्त ऑनलाइन टूल।

Spray Foam Insulation Board Feet Coverage Calculator Icon

स्प्रे फोम बोर्ड फुट कैलकुलेटर

ओपन सेल और क्लोज्ड सेल स्प्रे फोम इन्सुलेशन के लिए बोर्ड फीट, वर्ग फुट कवरेज और DIY किट आवश्यकताओं की गणना करें।

Wood Species Weight and Density Board Foot Calculator Icon

लकड़ी वजन कैलकुलेटर

बोर्ड फीट और लकड़ी के घनत्व से वजन की गणना करें। ओक, पाइन, सागौन, गीली बनाम सूखी लकड़ी के वजन का अनुमान।

Wall Framing Stud Count Board Feet Calculator Icon

दीवार स्टड फ्रेमिंग बोर्ड फुट कैलकुलेटर

दीवार फ्रेमिंग के लिए स्टड, टॉप/बॉटम प्लेट और कुल बोर्ड फीट की गणना करें। 16 इंच और 24 इंच OC स्टड्स की लागत।

Philippine Lumber Board Feet Rate Calculator Icon

बोर्ड फीट कैलकुलेटर फिलीपींस

फिलीपीन लकड़ी मानकों (सेमी, मीटर, इंच) के लिए बोर्ड फीट (BDFT) की गणना करें। नर्रा, महोगनी, याकल दरों के साथ ₱ अनुमान।

Deck Board Calculator and Lumber Estimator Icon

डेक बोर्ड कैलकुलेटर

Calculate deck boards, linear feet, and costs

Cubic Feet to Cubic Yards and Board Feet Calculator Icon

क्यूबिक फीट कैलकुलेटर

Calculate cubic feet, cubic yards, and board feet

Board Foot Chart for Lumber Icon

Board Foot Chart

Board feet for 2x4, 2x6, 1x6 and more, by length

Firewood Cord Calculator Icon

Cord of Wood Calculator

Measure firewood stacks in full cords and face cords

🔗 Explore More Timber & Forestry Tools

Estimate log volume, standing trees, lumber yield, or wood weight with our specialized tools: