Board Foot Calculator Desktop Header Logo
Calculateur BD FT
Forestry Calculator

Calculateur de Pieds-Planche d'Arbre

Estimez les pieds-planche d'un arbre sur pied selon son diamètre et sa hauteur.

Short answer: with the Doyle rule, board feet = ((DBH minus 4) squared / 16) x merchantable height in feet. An 18 inch tree with 32 feet of usable height gives 392 board feet before waste.

Tree Measurement

Enter tree dimensions to estimate board foot yield

Tip: DBH is measured at 4.5 feet above ground. Merchantable height is the usable length from stump to first major defect or branch.

Doyle Rule

Most conservative estimate. Formula: ((D-4)²/16) × L. Best for smaller diameter logs (12-28"). Commonly used in eastern US.

Scribner Rule

Moderate estimate based on diagram method. Most widely used in US. Provides middle-ground between Doyle and International rules.

International Rule

Most accurate for large logs. Formula based on cylinder volume with taper. Preferred for hardwoods and large diameter timber.

Foire aux questions

What is DBH and how do I measure it?
DBH (Diameter at Breast Height) is measured at 4.5 feet above ground level. Use a diameter tape or measure circumference and divide by π (3.14159).
Which log rule should I use?
Doyle for smaller logs (12-28" diameter), Scribner for general use (most common in US), International for large logs and hardwoods. Check local standards.
What is a typical waste factor?
15-25% is typical. Factors include: bark loss, sawdust (kerf), defects, taper, and trimming. Higher quality trees have lower waste.
How many board feet are in an 18 inch tree?
Using the Doyle rule, an 18 inch DBH tree with 32 feet of merchantable height gives 392 board feet before waste, or 333.2 board feet after a 15 percent waste factor. Scribner gives 431.92 board feet and International gives 520.99 board feet for the same tree, before waste.
Why do Doyle, Scribner, and International give different numbers?
Each rule was built for different log sizes and regions. Doyle is the most conservative and underestimates small logs. Scribner sits in the middle and is the most widely used in the US. International is the most accurate for large logs and hardwoods. Always agree the rule with your buyer before you sell.
How do I estimate the value of a standing tree?
Multiply the net board feet by your local price per board foot. For example, 333.2 net board feet at $1.50 per board foot is worth about $499.80. Check local timber prices, because species and log quality change the price per board foot a lot.

How to work out board feet for a tree, in plain words

Formula: with the Doyle rule, board feet = ((DBH minus 4) squared / 16) x merchantable height in feet, where DBH is the trunk diameter in inches at 4.5 feet above the ground. Doyle is the most conservative rule, so it gives the lowest number. Scribner and International use different formulas on the same two measurements and give higher numbers for the same tree.

Worked example: take one tree with an 18 inch DBH and 32 feet of merchantable height. Doyle: ((18 minus 4) squared / 16) x 32 = (196 / 16) x 32 = 392 board feet. Scribner: (0.79 x 324 minus 36 minus 4) x 2 = 431.92 board feet. International: (0.905 x 324 minus 32.72) x 2 = 520.99 board feet. After a 15 percent waste factor, the three rules give 333.2, 367.13, and 442.84 board feet. At $1.50 per board foot, the Doyle net yield is worth about $499.80.

Common mistakes: measuring DBH at the wrong height, counting height up to the top of the tree instead of the merchantable height, and forgetting the waste factor. Measure DBH at exactly 4.5 feet above the ground, and stop the height where the trunk branches or the diameter drops below saw log size.

When to use this method: use this calculator for a single standing tree or a small stand, and agree the log rule with your buyer first, because the rule changes the number by up to a third. For the full method with a second worked example, read our guide on how to calculate board feet in a standing tree, and use the logs calculator once the tree is cut into logs.

Calculateurs Spécialisés

Choisissez parmi notre collection de calculateurs de pieds-planche spécialisés

Insulation Board Feet Coverage Calculator Icon

Calculateur de Pieds-Planche d'Isolation

Calculez les pieds-planche pour isolants en laine de verre et panneaux rigides.

Standing Timber Tree Board Feet Calculator Icon

Calculateur de Pieds-Planche d'Arbre

Estimez les pieds-planche d'un arbre sur pied selon son diamètre et sa hauteur.

Forest Inventory Tree Volume Calculator Icon

Calculateur de Pieds-Planche pour Arbres sur Pied

Calculez le volume total en pieds-planche pour inventaires forestiers.

Wood Volume and Metric Board Foot Converter Icon

Calculateur Général de Volume de Bois

Calculez les pieds-planche et le volume cubique pour toutes essences.

Plywood Sheet Goods Board Feet Converter Icon

Calculateur de Pieds-Planche pour Contreplaqué

Convertissez les panneaux de contreplaqué en pieds-planche et volume cubique.

Log Scaling Board Foot Scale Calculator Icon

Calculateur de Pieds-Planche pour Grumes

Calculez le volume des billes de bois et les pieds-planche selon les règles officielles.

Dimensional Lumber Volume Board Feet Calculator Icon

Calculateur de Pieds-Planche de Bois d'Œuvre

Calculez les pieds-planche pour le bois de construction standard (2x4, 2x6, 4x4, 6x6).

Spray Foam Insulation Board Feet Coverage Calculator Icon

Calculateur de Pieds-Planche de Mousse Projetée

Calculez les pieds-planche de mousse projetée et la surface couverte.

Wood Species Weight and Density Board Foot Calculator Icon

Calculateur de Poids du Bois

Calculez le poids du bois à partir des pieds-planche et de la densité.

Wall Framing Stud Count Board Feet Calculator Icon

Calculateur d'Ossature Murale en Pieds-Planche

Calculez les montants et pieds-planche totaux pour murs à ossature bois.

Philippine Lumber Board Feet Rate Calculator Icon

Calculateur de Pieds-Planche Philippines

Calculez les pieds-planche (BDFT) pour les normes de bois des Philippines avec coûts en Pesos (₱).

Deck Board Calculator and Lumber Estimator Icon

Calculateur de Lames de Terrasse

Calculate deck boards, linear feet, and costs

Cubic Feet to Cubic Yards and Board Feet Calculator Icon

Calculateur de Pieds Cubes

Calculate cubic feet, cubic yards, and board feet

Board Foot Chart for Lumber Icon

Board Foot Chart

Board feet for 2x4, 2x6, 1x6 and more, by length

Firewood Cord Calculator Icon

Cord of Wood Calculator

Measure firewood stacks in full cords and face cords

🔗 Explore More Timber & Forestry Tools

Estimate log volume, standing trees, lumber yield, or wood weight with our specialized tools: